Vibration Sensors

Optoi vibration and acceleration sensors are based on a MEMS transducer interrogated by a microcontroller, which provides a suitable output using an algorithm. These inertial sensors are highly resistant to mechanical shocks and weathering thanks to their anodised metal casing.

Features

Dual axes
Internal 6 order hardware filter, 5Hz flatness
Wide analog outputs span 0.25 - 9.75V
Double alarm switch on each axis
Rugged device: fully metal case filled with protective resin
Resistant to electrical disturbs and transients
Power supply inversion internal protection
Operating temperature -40°C to +85°C
IP67 protection grade

Vibration Sensors: Design and Specifications

Model	Axes	Measurement range [g]	Sensitivity [mVolt/g]	Band [Hz]	Output @ 0g [mVolt]	Special features	Supply (V)	Operating Temperature [°C]
OIAC6	3	+/-3	330 mV/g	50 - 500 - 1500	1500	Self test pin	6 - 28	-40 / +85°C
OIAC7	3	+/-3	330 mV/g	50 - 500 - 1500	1500	Temperature sensor	6 - 28	-40 / +85°C
OIAC8	2	+/-2	4750 mV/g	2.5	5000	2x switch allarm NC with threshold +/-0.25g	18 - 32	-40 / +85°C
OIAC9	3	+/-16	57 mV/g	500	1500	Self test pin	6 - 28	-40 / +85°C

What is the purpose of a vibration sensor?

Optoi vibration sensors are built on MEMS technology, which is used to control and monitor vibrations, shocks and impacts in industrial machines, wind towers or the transport of sensitive goods. These sensors are also suitable for integration into analysis systems for predictive maintenance. The primary fields of application are, therefore, industrial and mobility.

Datasheets

All products

Impact Sensors

Impact sensors are configurable recorders based on a MEMS accelerometer. The device is powered by standard replaceable alkaline batteries ensuring at least 3 months of operation under normal use. The accelerometer provides acceleration monitoring up to 8g of force.Features Up to ±8g User configurable USB memory stick with downloadable software interface Event non-volatile memory Works with low cost and common AA batteries USB mini connector for connections Metal robust enclosure with mounting flanges IP67 Alive indicator

Inclination Sensors

Inclination sensors are devices based on a MEMS transducer interrogated by a microcontroller, which provides a suitable output using an algorithm.Our sensors, also known as inclinometers, are compact and highly resistant to mechanical shocks and weathering thanks to their anodised metal casing. Part of our inertial sensor range, Optoi inclinometers are available as 1- or 2-axis models with certified CANopen interface, with accuracy down to 0.05°, and analogue with voltage or current output.Features Rugged device: fully metal case filled with Protective resin High resolution (up to ±0.001 deg) High accuracy (typ. ±0.05 deg) Very High MTTF @ 12V and 24V 1D or 2D inclination measurement CANopen certified (DS301 / DSP-410) Programmable filter on measured angles Configurable without additional tools Operating temperature -40°C to +85°C IP67 protection grade Customizable on customer request